LED Colour Changing Tape

Online Catalogue |  LED Lighting |  LED Tapes |  LED Colour Changing Tape

RGB Colour Changing Tape Ref: ELLED/T/RGB
RGB Colour Changing Tape 5m reel of RGB colour changing tape which can be cut at 5m intervals. Features Super-bright LEDs which will last up to 50,000 hours and are covered with an epoxy coating to protect from general wear and tear and aid water resistance (IP67). Requires a fixed or IR remote control and a PSU (see below).

Each 5m kit will require a 100w PSU + fixed or remote controller. Additional tapes will also require 100w PSU as well as an amplifier (if one unit controlling all tapes) or its own fixed or remote control.
Reel Length 5m

Price: (4 or fewer items) £146.04 (Excluding VAT at 20%)
Price: (5 or more items) £124.13 (Excluding VAT at 20%)


Quantity:  
Prices subject to VAT
Remote Controller for RGB Tape Ref: ELLED/T/RGBRC
Remote Controller for RGB Tape 44 Key remote controller for RGB colour changing tape, with IR receiver and 13A 12v DC adaptor.

Includes pre set static colours, manual RGB and brightness adjustments, as well as 6 chase modes including colour change and colour fade with manual speed controls.

Price: £19.42 (Excluding VAT at 20%)


Quantity:  
Prices subject to VAT
RGB Fixed Controller Ref: ELLED/T/RGBC
RGB Fixed Controller RGB Fixed Controller, has 7 pre set colours, 10 colour changing modes (colour flip, colour fade, strobe etc), 8 brightness levels, 8 speeds for colour changing.

Max Current = 6A per channel or 15m tape.
Price: £42.08 (Excluding VAT at 20%)


Quantity:  
Prices subject to VAT
100w PSU Ref: ELLED/T/PSU100
100w PSU 100w power supply for up to 10m of fixed colour LED tape, or one 5m RGB colour changing tape. Features 2 output feeds.

Please note, PSU comes unwired, please ask for quote if you require a fully wired kit.

Price: £46.80 (Excluding VAT at 20%)


Quantity:  
Prices subject to VAT
LED Tape RGB Signal Amplifier Ref: ELLED/T/A
LED Tape RGB Signal Amplifier This unit allows RGB tapes to be extended over longer lengths whilst maintaining the signal strength from the source controller, meaning mulitple sets can be controlled by one remote or fixed controller. Amplifier can be wired in parallel or array.

Requires 100w PSU to control an additonal section of tape up to 5m.

Price: £28.80 (Excluding VAT at 20%)


Quantity:  
Prices subject to VAT

Online Catalogue |  LED Lighting |  LED Tapes |  LED Colour Changing Tape