logoEssential Supplies
Tel 0800 0432 123

 Free delivery on orders over £100   
Conditions apply, see Delivery Charges   

         
 
HomeHireDelivery ChargesTechnical AdviceView CartCheckout
spacer image

Lighting
   Marquee Lighting
  Stage Lighting
  Lighting Effects
  Dimmers & Controllers
  Emergency Lighting
  Exterior Lighting
  Spare Lamps
  LED Lighting
  Low Energy Lights
Electrical
   Adaptors
  Cables
  Cable Accessories
  Power Distribution
  Plugs & Sockets
  Extension Leads
  Testers
  Light Switch
  Enclosures
Heating
   Diesel Heaters
  Ducting
  Heater Accessories
Rigging
   Ropes, Pulleys & Wire
  Lighting Parts
  Ratchet Straps (Stocked)
  Ratchet Straps( To Order)
  Marquee Ground Anchor
  Bungees
Accessories
   Batteries
  Storage Boxes
  Cable Ties
  Velcro
  Tapes
Fasteners
   Masonary Bolts
  Marquee Fixings
Tools
   Drill Bits
  Hand Tools
  Health & Safety
  Ladders
  Stake Puller
  Tape Measures
  Power Tools
  Sledge Hammers
Trussing
 Lecterns
 Special Offers

spacer image

Cable Protectors

Online Catalogue | Electrical | Power Distribution |  Cable Protectors

The items listed below are our most commonly requested cable protectors, however we can make custom enclosures to suit any need!

Many different options are available including special cables, MCBs, RCD,RCBO,Trip warning and Current Measurement

Please contact us if you require avdice or are looking for a product not listed here!


Cable Protection Enclosure 32A Ref: ENC/PRO32
Cable Protection Enclosure 32A Keep it safe.
101 x 175 x 112 = (W x H x D in mm)
An in line enclosure to protect cable runs between power source (i.e. house) and main distribution board (in marquee). Fitted with an MCB and an RCD (100mA), the cable will be protected from earth faults and overload. The enclosure at one end will have 2m of cable to bare ends (for wiring into a house or generator), and at the other end 2m of cable to a socket. The RCD trip is rated at 100mA, this is less sensitive than the distribution boards which are 30mA, so most minor earth faults will only trip the distribution board. A red neon light is fitted to indicate the power is on. Waterproof to IP55.
PRICE: £88.00


Prices subject to VAT

Cable Protection Enclosure 63A Ref: ENC/PRO63
Cable Protection Enclosure 63A Keep it safe.
101 x 175 x 112 = (W x H x D in mm)
An in line enclosure to protect cable runs between power source (i.e. house) and main distribution board (in marquee). Fitted with an MCB and an RCD (100mA), the cable will be protected from earth faults and overload. The enclosure at one end will have 2m of cable to bare ends (for wiring into a house or generator), and at the other end 2m of cable to a socket. The RCD trip is rated at 100mA, this is less sensitive than the distribution boards which are 30mA, so most minor earth faults will only trip the distribution board. A red neon light is fitted to indicate the power is on. Waterproof to IP55.
PRICE: £122.00


Prices subject to VAT

Online Catalogue > Electrical > Power Distribution > Cable Protectors

spacer image