50m Cable for Self Assembly Festoon Kit
- Lead time:
- 2 Available - Next Day
- 50m Festoon cable
- Indoor and Outdoor use
Black 50m Cable, Used a part of our Self Assembly Festoon Kit
This is just one component of our Build your own Festoon Kit. Please note all components are only compatible with each other - not any other brands. Use our starter sets, pre-cut lengths of cable and loose lampholders to create a festoon to your sepcification simply and quickly. To make a festoon you will require:
- Festoon Cable - you choose what length 10m, 20m or 50m
- Starter Cable
- Lamps - See Golf Ball Lamps or GLS Lamps
To assemble simply place the 2 halves of the lampholder over the cable and screw it up tight. Use the small rubber seal if installing outside to create an IP65 seal and place clamp over the cable before screwing the cap in place. The festoon lampholders will pierce the cable of the festoon - no tools required.
The maximum suggested connectable length is 500m in one continuous run, depending on the lamps used. The festoon is easily daisy chained together with our special K-Type plugs & sockets.
This is compatible with our connectable festoon range. Use our starter sets, pre-cut lengths of cable and loose lampholders to create a festoon to your sepcification.
- Cable - 2 core 1.5mm HO5RNH2-F, Flat rubber cable
- Max Festoon Total Load - 2000w, 8.7 Amps (at 230v)
- Voltage - 110v or 230v Applications
- Plug & Socket - K Type, IP65 – Suitable for wet weather conditions (water jets 6.3mm nozzle)
- Only compatible with our connectable series.
Make sure all lamps are facing downwards, or a maximum of 45 degrees when used in external environments, this helps assist weather resistance.
IMPORTANT NOTE: Applications - Use
18th Edition Wiring Regulations BD7671:2018 now has regulation 711.559.4.3, which says this type of festoon is NOT suitable for use at Exhibitions or Public Shows. You need to use moulded festoon for those applications instead. see festoons
|Lead time:||2 Available - Next Day|