Economy Masonry Bolt M8 x 60

Hexagonal, Carbon Steel Shield, 8mm Thread, Masonry Bolt

Also known as ‘Shield Anchor Loose Bolts’ and ‘Floor Fixings’ that are most commonly applied as permanent fixings into concrete, brick work, hardstone and dense aggregate blockwork.

They do not work in perforated bricks or lightweight block work.

When tightened the tapered expander cone is drawn into the expansion segments, which forces them against the base surface. This allows keying and friction to take place in order to provide the necessary resistance to keep the bolt in place.

To use;

- Mark out hole positions and drill hole to correct diameter and depth

- Clean the hole of debris, blowing and brushing works best

- Insert the shield anchor and position your fixture where appropriate

- Insert the hexagonal bolt and using a torque wrench, tighten to the recommended torque

Specifications;

Drill Size 14mm

Box Quantity 50

Embedment Depth: 50mm

Recommended Tensile Load: 5.0KN

Recommended Shear Load: 4.4KN

Recommended Tightening Torque: 14Nm