10m / 10 lampholder Drop Festoon - drop 15cm (Needs starter plug)
Drop Lampholder Outdoor Festoon – Connectable Series
10m drop festoon has 10 pendant ES lampholders spaced at 1m intervals on 15cm drops. with 0.5m lead from plug to 1st lampholder, and 0.5m lead from last lampholder to socket. Lampholders and T drops are moulded onto the cable with a waterproof joint lampholders, so are not movable. This festoon has been specially made to make it easy to use festoons with paper lanterns or fifferent lamp shades.
The festoons are very popular for lighting outdoor eating areas at pubs, hotels and over patios in private gardens. Festoons are also widely used for lighting public areas at festivals, marquees, parties and events.
Plugs: Festoon is fitted with a K type plug & socket, many customers prefer to use standard Blue or Yellow 16 amp plugs, these are very easy to fit, you just have to cut off the pre-fitted K type plugs. You will need to buy a starter cable or fit a different plug to power up this festoon.
1 x Starter Plug see link
Set of Lamps: see
Lampholder ES / E27
Cable 2 core 0.75mm HO5RN-F rubber cable
Waterproof Rating IP44
Max suggested total load 1200w, 5.2 Amps (at 230v)
Voltage 110v or 230v
Plug & Socket K Type, IP44, only compatible with connectable series.
200m Max suggested length of Festoon, by joining other festoons end to end.
Make sure all lamps are facing downward when used in damp environments.
Bespoke festoons are available and made to order please quote number and type of lampholders the lampholder spacing and lead length to the first lamp when asking for a quote. Cable is available in yellow, black or white. Bespoke festoons normally take about 1 week for delivery. see