10m Extension for Connectable Festoon

Black 10m Cable, Used a part of our Self Assembly Festoon Kit
 

This cable can be used as an extension cable for the Connectable Festoon Series, as it uses the same connectors

This is just one component of our Build your own Festoon Kit. Please note all components are only compatible with each other - not any other brands. Use our starter sets, pre-cut lengths of cable and loose lampholders to create a festoon to your sepcification simply and quickly. To make a festoon you will require:

• Festoon Cable - you choose what length 10m, 20m or 50m
• Starter Cable  
• Lampholders
• Lamps - See Golf Ball Lamps or GLS Lamps 

To assemble simply place the 2 halves of the lampholder over the cable and screw it up tight. Use the small rubber seal if installing outside to create an IP65 seal and place clamp over the cable before screwing the cap in place. The festoon lampholders will pierce the cable of the festoon - no tools required. 

The maximum suggested connectable length is 500m in one continuous run, depending on the lamps used. The festoon is easily daisy chained together with our special K-Type plugs & sockets.

This is compatible with our connectable festoon range. Use our starter sets, pre-cut lengths of cable and loose lampholders to create a festoon to your sepcification.