FBT Ventis VN2000 Package
- Active Speaker System Package
- 2 x Ventis 206A & 2 x Subline 112SA
FBT Vertus CS1000 Portable Active Sub/Sat System
Product Description:
Features Include:
- 2-way speaker system
- Subwoofer with a custom 12" long excursion speaker with a 2.5" voice coil
- 6 x full-range, 3" neodymium high efficiency custom woofers with 0.75" voice coils
- Frequency response of 40Hz to 20KHz
- On-board Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
- Built-in DSP with eight pre-sets to suit every application
- Variable volume between -4.5 / + 5 dB in 8 steps
- Control Panel with master volume, pre-sets, satellite volume, HPF, and LED status
- Input and link via XLR and Neutrik SPEAKON for satellite connection
- Dispersion 110 degrees (H) x 30 degrees (V)
- Modular design allowing two systems to be configured as one single solution via optional accessories
- Bass reflex stackable subwoofer in a birch plywood enclosure with die cast aluminium handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
- The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
- The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted.
- Ideal for both live applications and fixed installations
- Easily expandable to a total power of 8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
Product Specification:
- Net Weight: 30kg
- Satellite Dimension (WxHxD): 105 x 530 x 120mm
- Subwoofer Dimension (WxHxD): 565 x 373 x 450mm
VN2000 Active Speaker System Package
The VN2000 is an Active Audio System built around four boxes: a pair of Ventis 206As and a pair of Subline 112SAs, bundled together with a pair of variable-height connecting poles. This makes for a powerful full-range mobile PA system that also offers the added flexibility to be broken down into smaller setups if thats what a particular event or situation requires.
This set up scales new heights for Power, Portability and Audio Quality - Hear why wood is the best!
Package Contents:
- 2 x VENTIS 206A - 2 x 6.5" +1" Active Speaker (SPLdB 124/131) - 12KG
- 2 x SUBline 112SA - 12" Active Subwoofer (SPL dB 129/133) - 23KG
- 2 x MSA 220BK - Telescopic Poles
- 4 x (2 x VN-C 206A / 2 x SL-C112) Padded Covers
Ventis 206A
The Ventis 206A is an extraordinary active speaker featuring a pair of 6.5 low frequency woofers and a 1 B&C high frequency compression driver arranged in a vertical configuration. Its a great sounding, solid box made out of 15mm birch ply finished in a scratch-resistant paint and features a full-face grille. At just 12kg, its incredibly easy to move around using the integrated handle on the back. It also features a number of M10 suspension points, so its perfect for permanent installation, as well as a 35mm top-hat underneath for mounting on the included sub pole or a standalone tripod.
Around the back youll find the amp module that almost spans the entire width of the cabinet and offers 700W RMS of low frequency amplification and 200W RMS of high frequency. As with the rest of the Ventis range, the LF is Class D while the HF is Class H/AB.
Power is delivered by a powerCON TRUE1 connector and an AC loop out is also included so you can daisy-chain the power for another cabinet.
Input-wise, the Ventis 206A offers a single XLR / ¼-inch jack combi socket that can accept both a LINE or MIC level signal and a pair of RCA phono connections to allow, for example, an external MP3 player to be directly connected. Both inputs have a dedicated level control, which means that a mic and background music source can be connected and mixed without the need for a separate mixer. An XLR output socket is also provided to allow the audio signal to loop out to another cabinet.
The built-in DSP accessed via a large backlit LCD display and corresponding turn-and-push control dial allows you to fine-tune the sound to your own liking. It also allows you to dial-in a delay (0-10 metres), which is very useful for conference work, as well as a Hi-Pass filter. This means that you can either run the box full-range, so its useful as a discreet cabinet for wedding ceremonies or speeches, or allow it to concentrate all of its power on the hi/mid frequencies when you have the sub connected.
SUBline 112SA
The Subline 112SA active cabinet has been called "a work of genius" in reviews (ProMobile) The band-pass design of its predecessor, the 12SA, has been updated to a more traditional bass-reflex configuration, resulting in a smaller and lighter cabinet. Some would argue that a front-firing box like this really needs to be a lot bigger, with chunky drivers, in order to get really low, but thats certainly not the case with the amazing 112SA.
The 112SA is built around a 12 woofer with a 2.5 coil, offering a huge amount of punch and high SPL from an incredibly compact design. The amp module offers 700W RMS and has a built-in DSP with eight different pre-sets. You also get an 8-step delay control and a Phase push button.
Two XLR input sockets (a stereo pair) are provided alongside corresponding outputs and a push button to activate or bypass the variable High Pass filter. This means that, for smaller gigs, you can run the VN2000 as a 3-box system with your mixer connected to a single sub feeding the two top boxes in stereo.
Looks wise, the sub matches the 206A perfectly, with its birch-ply cabinet finished in the same scratch-resistant paint and full-face grille. Two ergonomic handles on the side make it easy to lift and, at just 23kg, it really IS an easy lift!
The VN2000 is perfect for, conference work, ceremonies, speeches and events making it a perfect mobile DJ system.
FREE SHIPPING
OVER £75
*£10 ORDER CHARGE (ORDERS UNDER £40)
Bespoke Manufacturing
