Cable Protection Enclosure Tails to 63A 240v with 100mA RCD & MCB

Lead time:
2 - 3 Days
£271.55 £226.29
In stock
  • Bare Ends In, 63A Out
  • 100mA RCD + 63A MCB

InLine Cable Protector, Bare Ends / Lugs, 63A 240v output.

Adapter Generator to 63 Amp Single Phase

5 x M10 Lugs - for generator end
Mennekes Connector 240V 63A IP67 3 Pole
RCD 2 pole 63A / 100mA by Doepke
MCB 63A  Single pole by Doepke
Neon to show Power On
2m in & out of 16.0mm / 3 Core HO7 Rubber Cable

The enclosure will protect from overloads and Earth Faults.  If in doubt call our sales team

An in line enclosure to protect cable runs between power source (i.e. house) and main distribution board (in marquee). Fitted with an MCB and an RCD (100mA), the cable will be protected from earth faults and overload. The enclosure at one end will have 2m of cable to bare ends (for wiring into a house or generator), and at the other end 2m of cable to a socket. The RCD trip is rated at 100mA - less sensitive than the distribution boards which are 30mA, so most minor earth faults will only trip the distribution board. A red neon light is fitted to indicate the power is on

The enclosure at one end will have 1m of cable to Lugs , and at the other end 1m of cable to a 63A Mennekes Blue IP67 socket.

Enclosure Dimensions   101 x 175 x 112 (W x H x D in mm)
Enclosure waterproof to IP65